HONDA Outboard Motor BF135A - Manual (Page 94)

90 A
92
OIL PRESSURE INDICATOR
GOES OFF AND ENGINE
SPEED IS LIMITED
TAKING CARE OF UNEXPECTED PROBLEMS
BUZZER
BUZZER
(GREEN)
(GREEN)
Side-Mount Type
Panel-Mount/Top-Mount Types
Remove the fuse case lid.
Remove the electrical part cover.
Remove the old fuse by removing
two 5 mm screws.
Install a new fuse with the ‘‘90 A’’
mark downward.
ACG FUSE:
After finishing replacement, install
the fuse case lid with its hook
toward the engine side.
Be sure to check the fuse case lid
is securely locked.
A spare fuse is located on the reverse
side of the fuse case lid and tightened
with two 3 mm screws.
When the new fuse is set as a spare
fuse on the reverse side of the fuse
case lid, set the fuse so that you can
see the ‘‘90 A’’ mark on it. 3.
4.
5.
6.
7.
8.
04/01/21 11:24:00 31ZY6600_093