Honeywell MS4980 - Manual (Page 30)

26
C
ONFIGURATION
M
ODES
The MS4980 has three modes of configuration.
• Bar Codes
The MS4980 can be configured by scanning the bar codes included in the
MetroSelect Single-Line Configuration Guide (
MLPN
00-02544) or the Area
Imaging Supplemental Configuration Guide (
MLPN
00-05252) shipped with
the area imager. These manuals can also be downloaded FREE from
www.honeywell.com/aidc.
• MetroSet2
This user-friendly Windows-based configuration program allows you to
simply ‘point-and-click’ at the desired scanner options. This program can be
downloaded FREE from www.honeywell.com/aidc or set-up disks can be
ordered by contacting a customer service representative (see page 39).
• Serial Programming
This mode of configuration is ideal for OEM applications. This mode gives
the end-user the ability to send a series of commands using the serial port of
the host system. The commands are equivalent to the numerical values of
the bar codes located in the MetroSelect Single-Line Configuration Guide
(
MLPN
00-02544).