Honeywell HD-DVR-1016 - Manual (Page 160)

Web Client Operation
146
Abnormity
The abnormity interface is shown as below.
Figure 6-49 The Abnormity Setup Menu
Please refer to the following chart for detailed information.
Parameter Function
Event Type
Possible abnormal errors include: no disk, disk no space, disk
error, net error.
You need to draw a circle to enable this function.
Alarm Out
The corresponding alarm activation output channel when alarm
occurs, There are three channels.
Latch
The alarm output can be delayed for the specified time after the
alarm stops. Then
the system disables alarm and
corresponding activation output.
The value ranges from 10s to 300s.
Send email
If you enable this function, the system can send out an email to
notify the specified user.
Show The system can display alarm information in the local DVR