Honeywell HD-DVR-1016 User Manual
Page 176
FAQ
162
•
There is multiple-cast group setup in DVR. This mode can result in
a mosaic appearance. Usually we do not recommend this mode.
•
There is privacy mask or channel protection setup.
•
Current user has no right to monitor.
•
DVR local video output quality is not good.
15. Network connection is not stable.
There are following possibilities:
•
Network is not stable.
•
IP address conflict.
•
MAC address conflict.
•
PC or DVR network card is not good.
16. Burn error /USB back error.
There are the following possibilities:
•
Burner and DVR are in the same data cable.
•
System uses too many CPU resources. Please stop recording first
and then begin backup.
•
Data amount exceeds backup device capacity. It may result in
burner error.
•
Backup device is not compatible.
•
Backup device is damaged.
17. Keyboard cannot control DVR.
There are the following possibilities:
•
DVR serial port setup is incorrect.
•
Address is incorrect.
•
When there are several switchers, power supply is not enough.
•
Transmission distance is too far.
18. Alarm signal cannot been disarmed.