Overview of navigation and controls – Honeywell HD-DVR-1016 User Manual

Page 62

Advertising
background image

Overview of Navigation and Controls

48

• PTZ activation: Here you can set PTZ movement when the alarm

occurs. For example, go to preset, tour& pattern when there is an
alarm. Click Select, and you can see an interface as shown in

Figure

4-26

.

• Period: Click Set, and you can see an interface as shown in

Figure

4-24

. Here you can set for business days and non-business days. In

Figure 4-27

, click Set, and you can see an interface shown in

Figure

4-28

. Here you can set your own setup for business days and non-

business days.

• Show message: The system alert you on the local host screen if you

enabled this function.

• Send email: The system can send out an email to alert you when an

alarm occurs.

• Record channel: You can select the proper channel to record an alarm

video (Multiple choices). At the same time you need to set alarm
recording in the schedule interface (Main Menu

SettingSchedule)

and select the automatic record in manual record interface (Main
Menu

AdvanceManual Record).

• Alarm output: When the alarm sounds, the system enables the

peripheral alarm devices.

• Delay: When the input alarm is completed, the system continues the

alarm output and/or recording for a specified time respectively. The
value ranges from 10-300(Unit: second)

• Tour: Here you can enable the tour function when the alarm occurs. It

is a one-window tour; go to

Display

for the tour interval setup.

Note

If there are record channels selected, only the record
channels will be displayed in the tour.

Check boxes to select the corresponding function. After completing all the
settings, click Save, and the system goes back to the previous menu.

Advertising
This manual is related to the following products: