Honeywell HD-DVR-1016 - Manual (Page 81)

Honeywell
67
• Channel: Select the channel you want.
• Compression: System supports H.264.
• Resolution: System supports various resolutions, D1(4CIF)/CIF/QCIF.
You can select from the dropdown list. The extra stream of each
channel supports only QCIF resolution.
• Bit rate: System supports two types: CBR and VBR. Video quality is
better under higher bit rate. In CBR mode, bit rate is limited by the
setting value. In VBR mode, video quality level can be set.
• Quality: There are six levels ranging from 1 to 6. The sixth level has the
highest image quality.
• Frame rate: PAL 1-25f/s and NTSC 1-30f/s for any channels in CIF and
QCIF resolution. C
h1 (HD-DVR-1004, HD-DVR-1008 and HD-DVR-1016) &
ch9 (HD-DVR-1016 only) in D1 resolution can be set up to 25/30 f/s when all
the other channels are of CIF. All the other channels in D1 resolution can only
be set up to 6/7 f/s.
• Video/audio: You can enable or disable the audio of main stream or
video/audio of the extra stream by checking corresponding boxes.
• Overlay: Click Overlay, and you can see an interface shown in Figure
5-6 .
 Cover area (Privacy mask): Here you can set the privacy mask
section. You can drag you mouse to set proper section size. In one
channel video, the system supports a maximum 4 zones.
 Preview/monitor: There are two types of privacy masks. Preview
and Monitor. Preview means the privacy mask zone cannot be
viewed by the user when the system is in preview (live view) mode.
Monitor means the privacy mask zone cannot be viewed by the
user in record playback or network remote monitoring.
 Time display: You can select whether the system displays time or
not when you playback. Please click the set button and then drag
the title to the corresponding position in the screen.
 Channel display: You can select whether the system displays the
channel number or not when you playback. Click Set and then drag
the title to the corresponding position on the screen.