Schedule, Schedule menu, Figure 4-11 – Honeywell HD-DVR-1016 User Manual

Page 49: Honeywell

Advertising
background image

Honeywell

35

Figure 4-11 Sample of the Calendar

Schedule

After the system has booted up it will enter a default 24-hour regular mode.
You can set the record type and time in schedule interface.

Schedule Menu

In the main menu, from Setting to Schedule, you can go to the schedule
menu. See

Figure 4-12

Channel: Please select the channel number first.

You can select “all” if you want to set for all of the channels.

• Week day: There are eight options ranging from Saturday to Sunday

and the entire week.

• Pre-record: System can pre-record the video before the event triggers

recording. The value ranges from 1 to 30 seconds. But the actual pre-
record length depends on total channel number with pre-record
enabled and the bit rate of video stream. When pre-record is enabled in
all channels, actual pre-record length of each channel can be no less
than 4 seconds.

• Redundancy: save the record of the selected channel in two hard

disks. Please refer to

Redundancy

for more details.

• Record types: There are four types: regular, motion detection (MD),

alarm, motion detection and alarm.

Regular: The device will record in the selected time.

Advertising
This manual is related to the following products: