Honeywell HD-DVR-1016 - Manual (Page 61)

Honeywell
47
Figure 4-21 Menu of Camera Masking
Alarm Setup and Alarm Activation
Before operation, make sure you have properly connected alarm devices
such as the buzzer.
Go to alarm setup interface
On the main menu, from Setting to Alarm, you can see the alarm setup
interface. See
Figure 4-22 .
Alarm setup
Alarm interface is shown below. See Figure 4-22 .
• Alarm in: Allows you to select alarm input channel number.
• Event type: Select local input. Network input is not effective in HD-
DVR-1004, HD-DVR-1008 and HD-DVR-1016.
• Type: Normally open or normally closed.