Honeywell QUANTUME IS3480 - Manual (Page 15)

11
I
NSTALLATION
Notes for Laser Emulation
IS3480-104 Only
The IS3480-104 leaves the factory with the Laser Emulation Mode enabled.
If the Recall Defaults bar code is scanned while reconfiguring the scanner, the
laser emulation mode will no longer be enabled.
Scan the following bar code to re-enable the laser emulation interface.
This feature is only supported for IS3480-104 models.
Enable Laser Emulation Mode
³ 9 9 9 9 7 9