Radio signal is weak, Wireless access point (wap) filters mac addresses, Ation, see – HP LaserJet 1320nw Wireless User Manual
Page 39: Computer's wireless card is set, To the wrong wireless profile, Wireless access point (wap), Filters mac addresses
ENWW
Solving general wireless networking problems 33
Computer's wireless card is set to the wrong wireless profile
A wireless profile is a set of network settings unique to a given network. A single wireless card
might have several wireless profiles (for example, one for home and one for the office).
Open the configuration utility for the network card installed on your computer and verify that the
profile selected is the profile for the printer's network. If not, select the correct profile.
Radio signal is weak
If the printer is printing slowly, then the radio signal might be weak. Look at the network
configuration page. If the Signal Strength is 1 or 2, then follow these guidelines for reducing
interference in a wireless network:
●
Keep the wireless devices away from large metal objects, such as filing cabinets, and other
electromagnetic devices, such as microwaves and cordless telephones, as these objects can
disrupt radio signals.
●
Keep the wireless devices away from large masonry structures and other building structures
as these objects can absorb radio waves and lower signal strength.
●
For an infrastructure network, position the WAP in a central location in line of sight with the
wireless devices on the network.
●
Keep all wireless devices on the network within range of one another.
Wireless access point (WAP) filters MAC addresses
MAC filtering is a security feature in which a Wireless Access Point (WAP) is configured with a list
of MAC addresses (also called hardware addresses) of devices that are allowed to gain access to
the network through the WAP.
If the WAP does not have the hardware address of a device attempting to access the network, the
WAP denies the device access to the network. If the WAP filters MAC addresses, then the printer's
MAC address must be added to the WAP's list of accepted MAC addresses.
1
Print a network configuration page. To print a configuration page, when the printer is in the
Ready state, press and hold the Go button for 5 seconds. For more information, see
2
Find the printer's hardware address on the network configuration page.
Open the WAP's configuration utility, then add the printer's hardware address to the list of
accepted MAC addresses.