HotBrick VPN 800 - Manual (Page 77)

HotBrick Network Solutions
Page 73
Buttons • Refresh – Update the data on screen.
• Restart – Restart (reboot) the VPN 800/2 Firewall Router.
• Restore Factory Defaults – This will delete all existing settings, and restore
the factory default settings. See below for details.
Restore Factory Defaults
When the "Restore Factory Defaults" button on the Status screen above is clicked, the following
screen is displayed.
Figure 10-2: Restore Factory Defaults
If the "Restore Default Value" button on this screen is clicked:
• ALL of your settings will be erased.
• The default IP address, password and ALL other settings will be restored to the factory default
values.
• The DCHP server function will be enabled.