Husqvarna 356BTX - Manual (Page 20)

MAINTENANCE
20 – English
Maintenance schedule
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
Daily maintenance
1 Clean the outside of the machine.
2 Check that the throttle control functions safely.
3 Check that the stop switch works correctly.
4 Check that nuts and screws are tight.
5 Check that there are no fuel leaks.
Weekly maintenance
1 Clean the air filter. Replace if necessary.
2 Clean the outside of the spark plug. Remove and
check the electrode gap. Adjust the gap to 0.5 mm or
change the spark plug.
3 Clean the cooling system.
Monthly maintenance
1 Check fuel hose for cracks or other damage. Change
if necessary.
2 Check all cables and connections.
3 Replace the spark plug. Check that the spark plug is
fitted with a suppressor.
4 Check and clean the spark arrestor screen on the
muffler.
5 Check that the vibration damping elements are not
damaged.
6 Clean the fuel tank.
IMPORTANT!
Use only HUSQVARNA replacement parts. Use of other
brands of replacement parts can cause damage to your
unit or injury to the operator or others. Your warranty does
not cover damage or liability caused by the use of
accessories and/or attachments not specifically
recommended by HUSQVARNA.