Using pan, tilt, and zoom during live monitoring, Controlling ptz using the remote control, Setting camera preset positions – Honeywell HRSD4 User Manual
Page 106
Operation
106
Using Pan, Tilt, and Zoom During Live Monitoring
The DVR controls cameras with Pan, Tilt, and Zoom (PTZ) capabilities. To enter the PTZ
mode while in the full-screen mode of the desired camera, press PTZ. You can control
the camera using the buttons on the front panel or remote control, or by setting up
presets.
Controlling PTZ Using the Remote Control
•
Press the arrow buttons to pan left and right, and to tilt the camera up and down.
•
Use CAMERA 1 and CAMERA 2 to zoom in or zoom out.
•
Use CAMERA 3 and CAMERA 4 to focus the image.
Note
You can only enter the PTZ mode if the RS-232C port is set to
PTZ, and the PTZ device is selected during the Camera setup.
The PTZ icon (
) displays on the camera screen.
Note
When the DVR is in the PTZ mode, a white line displays around
the image.
Note
You cannot enter the PTZ mode when the selected camera is
Off, has lost or is set to Covert.
Setting Camera Preset Positions
Using the PTZ Menu
1.
Press the MENU button in the PTZ mode. The PTZ menu appears.