Saving a preset camera position – Honeywell HRSD4 User Manual

Page 107

Advertising
background image

Operation

Document 800-00919

Rev F

107

02/08

Figure 4-3

PTZ Menu

2.

Set the feature you wish to control by selecting it from the menu. Refer to the
camera manufacturer's instructions for the proper settings. Depending on the
camera specifications, some features may not be supported.

3.

Exit the PTZ Menu by either:
Clicking Set Preset to save the settings.
Or
Clicking Quit to close the menu without saving the settings.

Saving a Preset Camera Position

After you have the camera at the desired settings, you can save camera position
settings as presets so that you can go directly to desired views.

1.

Select Set Preset in the PTZ Menu. The PTZ Preset screen appears.

Figure 4-4

PTZ Preset Screen

2.

Select the number you want to assign to the preset and press

.

3.

Enter the preset name using the virtual keyboard and press

again to save as

preset.

Advertising