Connecting the power cord – Honeywell HRSD4 User Manual
Page 30
Installation
30
See
Chapter 4, Operation
for how to archive video to an external USB-IDE hard disk
drive, USB CD-RW drive, or USB flash drive. You also can upgrade the software via USB
port.
Connecting the Power Cord
Connect the power cord to the DVR and then to the wall outlet.
Figure 2-14
Power Cord Connector
WARNING!
ROUTE POWER CORDS SO THAT THEY ARE NOT A
TRIPPING HAZARD. ENSURE THAT THE POWER CORD
WILL NOT BE PINCHED OR ABRADED BY FURNITURE.
DO NOT INSTALL POWER CORDS UNDER RUGS OR
CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR
POWER OUTLET DOES NOT HAVE A GROUNDING PIN
RECEPTACLE, DO NOT MODIFY THE PLUG.
DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO
MANY DEVICES IN TO ONE CIRCUIT.
Caution
In noisy electrical environments, use an Uninterruptible Power
Supply (UPS) to minimize the potential of damage to the DVR
from undesired power related hazards. Connect the UPS between
the DVR and the AC voltage supply.
Your DVR is now ready to operate. Please continue to
Chapter 3, Configuration
and
Chapter 4, Operation
.