Honeywell HRSD4 - Manual (Page 54)

Configuration
54
The Motion Detection Zone screen lays over the video for the selected camera. A
bright box appears around groups of four cells. Use the arrows to navigate the
box around the screen.
You can activate or deactivate four cells at a time by pressing . You can
activate or deactivate individual cells by using the camera buttons.
2. Press Menu when you have finished activating and deactivating the motion
detection cells. The Motion Detection Zone setup menu appears. It has the
following functions:
3. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Setting Up the Text-In Feature
You can set the DVR to display the text-in information.
1. Highlight Text-In in the Main menu and press . The Text-In setup screen
appears.
Figure 3-24 Text-In Setup Screen
Table 3-6 Motion Detection Zone Screen Options
Option Function
Exit with save Closes the menu after saving the changes
Exit without save Closes the menu without saving the changes
Select All blocks Activates all blocks to detect motion
Clear All blocks Deactivates all blocks so that they do not detect motion