Honeywell HRSD4 User Manual
Page 55
Configuration
Document 800-00919
Rev F
55
02/08
Note
If networking is configured by the external modem, the text-in
cannot be set up. Set the DVR for LAN connections (see
Setting
the Connection Type
on page
83
) and set up text-in for RS-232C
port (see
Communicating with External Devices Using the
RS-232C Port
on page
60
).
Note
Text-in data can not be recorded during clip copy.
2.
Highlight the field beside Use Text-In and press
to toggle between On and
Off.
3.
Highlight the box next to Multi-devices on 1 channel and press
to toggle
between On and Off. When turned On, the DVR supports up to 4 text inputs.
If you turn On Multi-devices on 1 channel, then you can select only VP Filter
from the Product Type list.
If you turn Off Multi-devices on 1 channel, then you can select Generic Text,
EPSON-POS, or VP Filter from the Product Type list.
4.
Highlight the field beside Product Type, and press
.
5.
Select your device from the list. Your choices are:
•
Generic Text
•
EPSON-POS
•
VP Filter
Settings for Generic Text, EPSON-POS, and VP Filter
Note
VP Filter, Generic Text, and EPSON-POS devices are currently
supported.
The following description is for VP Filter, Generic Text, and EPSON-POS devices. The
screen changes for different types of text input devices, and there are different
parameter boxes for you to enter information.