Configuring recording settings – Honeywell HRSD4 User Manual

Page 61

Advertising
background image

Configuration

Document 800-00919

Rev F

61

02/08

From the Main menu, select RS232 and press

. The RS232 Setup screen appears.

Figure 3-31

RS232 Setup Screen

1.

Highlight the field for the settings you wish to change. Select the correct Baud
Rate
, Parity, Data Bit, and Stop Bit for the device you are connecting to the DVR.

2.

Highlight the field next to Usage, and press

to toggle through the list:

Remote Control, External Modem, Text-In, or PTZ.

Note

Selecting External Modem in the RS232 field only defines the
RS-232C port as being used for the external modem
connections. See

Modem Setup Screen

on page

89

for how to

set up an external modem.

Note

Selecting PTZ in the RS232 field only defines the RS-232C port
as being used for the PTZ camera connections. Select the PTZ
device in the Camera Setup screen (see

Camera Setup Screen

on page

50

).

Configuring Recording Settings

Note

When the DVR is recording video, the RECORD LED on the front
panel lights up and

displays on each camera screen.

Advertising