Honeywell HRSD4 - Manual (Page 67)

Configuration
Document 800-00919 Rev F 67
02/08
Note You should use this feature only if you enable Event recording
during time-lapse recording. If you do not have Event recording
enabled, then you will be unnecessarily limiting the storage
space for time-lapse recording.
Note The maximum storage time is only an estimate because the
amount of space required to store video varies depending on
many factors such as motion and image complexity.
Setting the DVR for Pre-Event Recording
When the DVR is in the Event Record mode, it is possible to have it record images
before the event occurs. The Pre-Event Record screen allows you to define how to
handle pre-event recording.
From the Main menu, select Record, then Pre-Event Record and press . The
Pre-Event Record setup screen appears.
Figure 3-35 Pre-Event Recording Setup Screen
You can turn individual cameras On or Off for pre-event recording. The image speed
can be set from 0.5 to 30 ips (25 ips PAL), and image quality can be set to High,
Standard, and Low.