Honeywell HRSD4 User Manual
Page 86
Configuration
86
3.
Highlight the field beside DNS Server and press
to enter the IP address of
the DNS server. If you set up the DNS Server, you can use the domain name of
the DVRNS server instead of the IP address during the DVRNS Server setup. See
Registering the Network for DVRNS Service
on page
89
for details.
4.
Highlight Port Number Setup… and press
. The Port Number Setup screen
appears.
Figure 3-52
Port Number Setup Screen
Note
You need to get the appropriate Port Number for each
RASplus-related program (Admin, Watch, Search, and Callback)
from your network administrator.
5.
Change the number by highlighting it and using the Up and Down arrows to
increase or decrease the number.
The factory default Port settings are:
Remote Admin:
8200
Remote Watch:
8016
Remote Search:
10019
Remote Callback:
8201
Note
The system restarts automatically after changing the port
settings.
Note
Do NOT use the same port number for two different programs,
otherwise, the DVR cannot be connected with a PC running
RASplus.