HP 7000N - Manual (Page 89)

Interpret control-panel status lights
The product has six LEDs on the control panel that indicate product status. The table below explains
how to interpret these LEDs.
LED behavior Description
All LEDs are off. The product is turned off.
Sleep LED is on. The product is in sleep (power conservation) mode.
Sleep LED is flashing. The product is entering or exiting sleep mode.
Sleep LED is off. The product is not in sleep mode, nor is it transitioning sleep status (on or off).
Power LED is on. The product is powered on.
Power LED is off. The power supply is not providing power to the product.
Ready LED is on. The product is online and able to accept input.
Ready LED is flashing. The product is pausing a request or has stopped receiving input.
Ready LED is off. The product is paused and unable to accept input. This may be because the product
was deliberately paused, or because the product is in an error state.
Data LED is on. The product has data buffered that it has finished processing and is waiting for more
data to be transmitted, or the product is paused. When the Attention LED is flashing at
the same time, there is an error and there is data waiting to be processed.
Data LED is flashing. The product is receiving or processing data.
Data LED is off. There is no data for the product to process.
Attention LED is on. The product has encountered a critical error, the nature of which is indicated on the
display.
Attention LED is flashing
quickly.
The product has encountered an error which requires user intervention, such as a
paper jam or an open door.
Attention LED is off. No error condition exists.
NOTE: Status and error conditions appear on the display.
Interpret control-panel status lights 81