Honeywell HMLCD19 User Manual

Page 4

Advertising
background image

Rev. A

iv

HMMU000882

04/09/04

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instruction in the
literature accompanying the product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Rev. A

19

HMMU000882

04/09/04

SECTION 4:

TROUBLESHOOTING AND MAINTENANCE

4.1 TROUBLESHOOTING

No Power

• Make sure the Power cable is plugged to the wall and the

back of the monitor.

• Make sure that the Power button on the front of the monitor

is turned ON. Press the Power button firmly to turn the
power OFF, then again to turn it ON.

Poor Picture Quality

If the quality of the picture is poor and cannot be improved by

making adjustments on the front control panel, inspect all
system connections and cable runs.

4.2 MAINTENANCE

To reduce the risk of electrical shock, do not remove the cover

or back of monitor. No user-serviceable parts are inside.

4.3 SERVICE

AND

SUPPORT

Refer servicing to qualified personnel or contact the Technical

Support at 1-800-796-CCTV for assistance.

Advertising