Humminbird 700 SERIES 798CI - Manual (Page 120)

108
Cursor to Waypoint
(Chart or Combo View only)
Cursor to Waypoint allows you to quickly move the cursor to any saved
waypoint so that you can locate it or edit it.
NOTE: This X-Press™ Menu option only appears if you have saved waypoints.
To move the cursor to a saved waypoint:
1. Highlight Cursor to Waypoint on the Navigation X-Press™ Menu.
2. Press the RIGHT Cursor key to initiate Cursor to Waypoint.
3. Press the UP or DOWN Cursor keys to select a waypoint, then press the
RIGHT Cursor key to select the destination waypoint.
Save Current Track
Save Current Track allows you to save the current
track being displayed. After the current track is saved, a new current track is
started.
NOTE: Save Current Track appears on the Navigation X-Press™ Menu after navigation
is stopped.
To Save Current Track:
1. Highlight Save Current Track on the Navigation X-Press™ Menu.
2. Press the RIGHT Cursor key to initiate saving the current track.
3. The Confirm dialog box will appear. To save the current track, press the
RIGHT Cursor key once more. To cancel saving the current track, press
the LEFT Cursor key.
Navigation X-Press™ Menu