Specifications – Humminbird 700 SERIES 798CI User Manual

Page 191

Advertising
background image

179

Specifications

Depth Capability. . . . . . . . . . . . . . . . . . . . . . . . 150 ft (50 m) Side Imaging®

1500 ft (500 m) DualBeam PLUS™

Power Output . . . . . . . . . . . . 500 Watts (RMS), 4000 Watts (Peak to Peak)

Operating Frequency. . . . 455 kHz, 200 kHz and 83 kHz DualBeam PLUS™

Area of Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . Side Imaging®: (2) 86º @ -10 db in 455 kHz (180º Total Coverage)

DualBeam PLUS™: 60° @ -10 dB in 83 kHz

20° @ -10 dB in 200 kHz

Target Separation . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1/2 Inches (63.5 mm)

Power Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20 VDC

LCD Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640 V x 640 H

Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XNT 9 SI 180 T

Transducer Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ft (6 m)

Current Draw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 mA

NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual
depth performance may vary due to transducer installation, water type, thermal layers,
bottom composition and slope.

NOTE: Product specifications and features are subject to change without notice.

Specifications

Advertising
This manual is related to the following products: