Husqvarna 136 - Manual (Page 15)

15
TECHNICAL DATA SHEET
Engine
Cylinder volume, cm
3 36 40
Stroke, mm 32 32
Idle speed, rpm 3,000 3,000
Recommended max.
speed, unloaded, rpm
13,000 13,000
Power, kW 1,6 1,9
Ignition system
Manufacturer
Phelon Phelon
Type of ignition system CD CD
Spark plug Champion
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer
Walbro Walbro
Carburetor type WT 289 WT 289
Fuel capacity, litre 0,41 0,41
Oil pump capacity at
8500 rpm, ml/min
6 -- 8 6 -- 8
Oil capacity, litre 0,29 0,29
Type of oil pump Automatic
Weight
Without bar and chain, kg 4,6
4,6
BAR CHAIN
Length Pitch Max
Inches Inches Tip Radius _
13 0,325 10T Husqvarna H30
15 0,325 10T Husqvarna H30
136 Noise levels
Equivalent (see note 1) noise
pressure level at operator ’s ear,
measured according to relevant
international standards, dB(A)
98 98
Equivalent (see note 1) noise
power level, measured
according to relevant
international standards, dB(A) 107,7 108,2
Vibration levels
(see note 2)
Front handle, m/s
2 4,9 4,8
Rear handle, m/s 2 7,7 6,5
Chain/bar
Standard bar length,
in/cm
13/33 15/38
Recommended bar
lengths, in/cm
13/33 15/38
Usable cutting
length, in/cm
12,5/32 14,5/37
Chain speed at maximum
power, m/sec
16,3 16,3
Pitch, inches 0,325 0,325
Thickness of drive link, mm 1,3
No. of teeth on drive sprocket 7
Note 1: Equivalent noise level is, according to
ISO 7182 and ISO 9207, calculated as the
time--weighted energy total for noise levels un-
der various working conditions with the follow-
ing time distribution, 1/2 idle, 1/3 full load, 1/3
full speed.
Note 2: Equivalent vibration level is, according
to ISO 7505, calculated as the time--weighted
energy total for vibration levels under various
working conditions with the following time dis-
tribution: 1/3 idle, 1/3 full load, 1/3 full speed.
141 141 136
H30 0,325
0,050/
1,3
3/16
4,8
85 30 10
0,025/
0,65
13/33/56
15/38/64
YEAR OF CONSTRUCTION: 2002
MANUFACTURER’S ADDRESS: Husqvarna
SE--561 82 Huskvarna
Huskvarna, Sweden