Hunter Fan 44260 - Manual (Page 25)

25
The default for this thermostat setting is in a
12 hour format. You can change the format to
24 hour format by pressing
Day/Time
and then
Program.
The aM/pM indicator will be off when the thermostat is
in 24 hour mode.
Setting day and time:
1. Press
Day/Time
. (AM/PM and current hour will
flash)
2. Press
Up
or
Down
to adjust the setting.
3. Press
Day/Time
again to adjust the minute
setting.
4. Press
Day/Time
again to adjust the day of the
week.
5. Press
Day/Time
to return to the normal display.
You may also press hold/return at any time to return
to the normal display.
SETTingS, ConT.