Honeywell TRUESTEAM 69-2286EFS-03 User Manual
Page 20
C
leaning
an
D
maintenan
C
e
How do i reassemble and start up truesteam? Follow these steps to reassemble the tank and start up
TrueSTEAM after cleaning:
Attach tank by raising the latch.
Pull the white water valve forward to connect to the
the black spool. Then turn the manual shutoff valve to
the “Lock” position.
Plug in the power cord.
The Power light will be on at start-up. If the humidity
control is also actively calling for humidity, the
Humidifying light will blink. This indicates that
TrueSTEAM is waiting to act on the call to allow time
for the tank to be fully connected.
Press the Go button to make TrueSTEAM ready
for use. You must actively call for humidity from the
humidity control for TrueSTEAM to produce steam.
Note: You don’t have to press the Go button after plugging in the power cord.
TrueSTEAM will wait for 5 minutes and then automatically reset itself.
M29675
M29676
M29677
TrueSTEAM Humidification System 69-2286EFS—03
18
2
3
4
5
1