Honeywell Switches and Sensors - Manual (Page 114)

112
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
510 Series , Mechanical
The 510 Series controls are manually operated, rotary, mechanical encoders
that provide a two-bit gray code for relative reference applications and a four-
bit gray code for absolute electrical reference applications. The “L” channel
leads the “R” channel by 90° electrically in the CW position. It features
continuous electrical travel and has a rotational life of more than 100,000
shaft revolutions with a positive detent feel.
This series is small-sized, 21,08 mm 2 by 8,71 mm deep (0.83 in 2 x 0.343 in)
long and commonly used in limited-space, panel-mounted applications where
the need for costly, front-panel displays can be completely eliminated. Digital
gray-code outputs eliminate the need for
A/D converters.
Bushing: 9,52 mm (0.375 in) Ø x 6,35 mm (0.25 in) L
Shaft: Flatted, 6,35 mm (0.25 in) Ø x 19,05 mm (0.75 in) L
Body: 21,08 mm (0.830 in) square
Operating temperature: -40 °C to 105 °C (-40 °F to 221 °F)
Rotational cycles: 100,000
OPTIONS
Vertical Mount, PC Terminals/bent back
GREY CODE OPTIONS REFERENCE
2 bit/4 cycles 510E1A48F204PC
2 bit/6 cycles 510E1A48F206PC
2 bit/9 cycles 510E1A48F209PC
4 bit/16 cycles 510E1A48F416PC
Horizontal Mount, PC Terminals/straight
GREY CODE OPTIONS REFERENCE
2 bit/4 cycles 510E1A48F204PB
2 bit/6 cycles 510E1A48F206PB
2 bit/9 cycles 510E1A48F209PB
4 bit/16 cycles 510E1A48F416PB
Brackets
MOUNTING DIRECTION REFERENCE
Vertical 510VBKT
Horizontal 510HBKT
600 Series, Optical
The 600 Series controls are manually operated, rotary, optical encoders that
output two square waves in quadrature at a rate of 128 pulse per channel per
revolution as a standard with other resolutions down to 60 pulses available.
The outputs are TTL compatible. PC terminals or cable leads are available.
Pulses per revolution: 128
Supply voltage: 5.0 V
Body: 34,93 mm (1.375 in) Ø
Shaft: 6.35 mm [0.25 in] dia by 22.23 mm [0.875] long
Bushing: 9,52 mm [0.375 in] dia by 9,52 mm [0.375 in] long
Operating temperature: -40 °C to 65 °C (-40 °F to 149 °F)
Revolutions: 10 million
1,27 typ.
[ 0.05 Typ. ]
12 34
1,91 [0.075]
17,5 [0.69]
“A”
12,2 [0.48]
0,64 x 3,05
[0.025 x 0.012]
OPTIONS
Series 600
TERMINATION REFERENCE
177,8 mm (7.0 in) long cable 600EN-128-CBL
PC terminals exiting side 600EN-128-B66
PC terminals exiting rear 600EN-128-C24
177,8 mm (7.0 in) long cable with connector 600EN-128-CN1
Encoders