Hitachi 46F500 - Manual (Page 52)

SETUP
52
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP (
̆ ) or DOWN ( ̄ ).
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are
connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL MANAGER - SCAN to add or to erase additional channels (see page 42).
Auto Channel Scan
Setup
SEL Cancel
Set The Channels
Ant A
Setup
Move SEL Select
Set The Channels
Ant A
Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Setup
Move SEL Select
Set The Channels
Ant A
Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Auto Channel Scan
Cancel
Scanning Channel Number: 66
CURSOR
SELECT