Honeywell RDD100 - Manual (Page 2)

RDD100 User Guide
2 www.honeywell.com
Table of Contents
1 Introduction
1.1
Product Overview
1.2 Transducer Description
2 Equipment Set Up
2.1 Cables & Connections
2.2 Personal Computer Set Up
2.3 Set Transducer Baud Rate
2.4 Setting Transducer Display Units
2.5 “Continuous Transmit” Mode
2.6 Changes Stored In EEPROM
2.7 Verifying Stored Parameters
3 Operation
3.1 Start Up Messages
3.2 Error Indications
3.2.1 Transducer Not Connected
3.2.2 Incorrect Baud Rate
3.2.3 Not Set Up To Continuously Transmit
3.2.4 Wrong Polarity Of DC Power
3.2.5 Transducer Disconnected While Transmitting
3.2.6 Over/Under-Ranged Transducer Indications
4 Power Requirements
4.1
Voltage
4.2 Current
4.3 Power Connection
5 Operating Environment
5.1 Operating Temp Range
5.2 Storage Temp Range
5.3 Relative Humidity
6 Dimensions
6.1
Overall
6.2 Panel Cutout Dimensions
6.3 Depth Behind Panel