Honeywell V5863A - Manual (Page 2)

M6410A, M7410F ACTUATORS V5862A,V5863A VALVES
63-1293—03 2
Electrical Ratings:
 Input Power:
 24 Vac, +10/-30 percent, 50/60 Hz.
 Power Consumption:
 M6410A: 0.7 VA.
 M7410F: 1.4 VA.
 Input Signal (M7410F): Modulating 0 to 10V, 2 to 10V
(adjustable), 0.1 mA.
 Input Impedance (M7410F): 100K ohms.
Stroke:
 1/4 in. (6.5 mm).
Running Time:
 At 50 Hz: 150 seconds.
 At 60 Hz: 125 seconds.
Stem Force:
 67.5 lb (300 N).
Suitable Medium:
 Water with maximum 50% glycol.
Controlled Water Temperature:
 36° to 230°F (2° to 110°C).
Rangeability:
 Two-way Valve: 50:1.
 Three-way Valve: 50:1 for controlled port (A to AB).
Flow Characteristic:
 Linear.
Valve Cv Rating:
 See Table 1.
NOTE: To determine the capacity index (Cv) needed for
your application, use the following formula: Cv =
gallons per minute divided by the square root of
the pressure drop across the valve when the
valve is fully open.
Body Material:
 Brass.
Stem and Plug Assembly:
 Stem: Stainless steel.
 Plug: Brass.
Actuator Required:
 M6410A: Non-Spring Return Valve Actuator (3-position
floating).
 M7410F: 0 to 10 Vdc or 2 to 10 Vdc Electronic Actuator.
 Valve inserts are provided as spare parts. See Table 2.
Leakage Rate:
 <=0.05% of Cv.
Valve Close-off Ratings:
 See Table 1.
Approvals (Actuators):
 Underwriters Laboratories Inc. listed for plenum use
(UL94-5V).
Table 1. Valve Close-off Ratings.
Accessories and Replacement Parts:
 WV3000R Insert Replacement Tool, for replacing cartridge
insert.
Table 2. Valve Insert Replacement Parts.
Pipe Size in
in. (mm) C
v
Close-off Rating (psi)
Two-way Three-way
1 (25) 5.5 232 232
7.8
11
1-1/4 (32) 18 174 174
1-1/2 (38) 25 145 145
Diameter (in.) For Valve Cv Part Number
Two-Way
1 V5862A3003 5.5 0903827
V5862A3011 7.8
V5862A3029 11
1-1/4 V5862A3037 18 0903828
1-1/2 V5862A3045 25 0903829
Three-Way
1 V5863A3002 5.5 0903827
V5863A3010 7.8
V5863A3028 11
1-1/4 V5863A3036 18 0903828
1-1/2 V5863A3044 25 0903829 M19693