Hach 6120118 - Manual (Page 21)

21
User Interface and Navigation
4.2 Using the sc1000 Controller
The sc1000 is a touch screen application. Use your finger to touch keys and menu
commands. In normal operation the touch screen displays the measured values for the
sensors selected.
4.2.1 Display Features
4.2.1.1 Using the Pop-up Toolbar
The pop-up toolbar provides access to the controller and sensor settings. The toolbar is
normally hidden from view. To view the toolbar, touch the bottom-left of the screen.
Figure 14 Pop-up Toolbar Functions
4.2.1.2 Using the Menu Windows
If the Menu button (from the pop-up toolbar) is selected, the Main Menu screen is opened.
The Main Menu screen allows the user to view the sensor status, configure the sensor
setup, system setup, and perform diagnostics.
The menu structure may vary depending on the configuration of the system.
MAIN MENU –displays the Main Menu Structure
UP Arrow–scrolls up to the previous displayed value.
Displays one value.
Displays two values at the same time.
Displays four values at the same time.
LIST –displays the list of connected devices and sensors.
DOWN Arrow–scrolls down to the next displayed value.
1 2 4
1
2
4