9 adjusting the temperature, Select calibrate and confirm, Select temp adjust and confirm – Hach 6120118 User Manual
Page 31: Select measured temp and confirm
Advertising
31
Operation
5.9 Adjusting the Temperature
View or change the temperature using the steps below:
1.
From the Main Menu, select SENSOR SETUP and confirm.
2.
Select the appropriate sensor if more than one is attached and confirm.
3.
Select CALIBRATE and confirm.
4.
Select TEMP ADJUST and confirm.
5.
Select MEASURED TEMP and confirm.
6.
The temperature will be displayed. Select the temperature to edit and confirm.
Advertising