Honeywell FUSION - Manual (Page 108)

FUSION DVR Digital Recording and Transmission System
7–6
7.4 CREATING AND VIEWING PRESET POSITIONS
A Preset Position is a user-defined location where the camera can be pointed, zoomed
in, and focused. Preset positions can be defined and labeled if the camera supports
this. Each preset can have an independent Dwell and Speed setting for use with the
Tour 2 Function.
4
5
2 3 1
2 3
2
1 Set Once a preset is selected, the Set button records the
preset position.
2 Clear The Clear option deletes the selected Preset.
3 Clear All This option deletes all Preset Positions.
4 Test Preset This option tests a selected Preset Position.
5 Preset Positions This displays the Preset Positions. If a preset is currently
used, a check will be placed in the box next to its name.
7.4.1 CREATING A PRESET
1. Inside Setup, select the PTZ setup option and the
camera to edit.
2. Inside the Preset options select a Preset you would like
to modify (a red box will appear around the Preset).
3. Use the Pan/Tilt/Zoom/Focus controls to move the
selected camera to the desired position.
4. Enter a Dwell Time and Speed setting. This is used for
the Tour 2 function (Each Preset can have a different
Dwell and Speed setting).
5. Once the camera is in the desired position, press the
Set button.