Honeywell FUSION User Manual

Page 156

Advertising
background image

FUSION DVR Digital Recording and Transmission System

14–2

14.1 WEB VIEWER OVERVIEW, CONTINUED

1 Screen

Division

Buttons

Allows view of one or more sets of cameras at a time.
They are organized in several different groups such as
1x1, 4x4, and 8x8.

2 GO!

Activates the commands

3 Camera

Buttons Enable or disable selected cameras for use when

searching.

14.1.1 CONFIGURING THE DVR SERVER TO ACCEPT REMOTE CONNECTIONS

1.

Enter

Setup on the DVR unit.

2.

Open

the

Network menu.

3.

Uncheck

the

Disable Remote Control option.

Adjust port settings if necessary.

NOTE: If using a Firewall, it may be necessary to adjust the port settings on both the

DVR and the Firewall. Contact the Network Administrator for more
information.

4.

Check

the

Enable Web Viewer option.

Again, adjust port settings if necessary

5.

Press

OK.

6.

Make

sure

a

User account is created.

Without a user account, the Administrator account must be used.

The DVR server is now ready to receive incoming connections.

14.1.2 CONNECTING TO A DVR WITH THE WEB VIEWER

1. Open Microsoft® Internet Explorer® 5.5 or later.

2. Enter the IP address of the DVR into the Address Bar.

3. When attempting this for the first time a window will open and ask for approval to

accept an Active X installation. Select Yes to this.

NOTE: If a message is received saying your Internet Explorer® security settings do

not allow for downloading Active X components then adjust the browser
security settings. One way to do this is to add the IP address of the DVR to
your trusted sites list inside Internet Explorer® settings. Contact the System
administrator for additional help with adjusting Internet Explorer® settings.

4. When the Web Viewer finishes loading select one or more cameras (or select a

screen division button).

5.

Press

GO!.

Advertising