Honeywell FUSION User Manual

Page 94

Advertising
background image

FUSION DVR Digital Recording and Transmission System

6–10

6.12 INDEX

SEARCH

Using

the

Index Search can greatly decrease the amount of time spent searching

through saved video. The Index Search allows a user to perform a search based on
criteria such as Sensor, Motion and Instant Record events.

1 Select

All

Cameras

This option selects all cameras.

2 Multiple

camera
search

Select one or more cameras to
search.

3 Select

Time The default search time is 24

Hours. If this option is select
then a Start Time and End Time
must be entered.

4 Start

Time Specifies the Start Time for the

Index Search.

5 End

Time Specifies the End Time for the

Index search.

6 Sort

Option

Searches by the selected
event: Sensor, Motion
Detection, or Instant Record.

7 All

Event

Searches on all events (sensor,
motion, instant recording) for
the selected camera(s).

6.12.1 PERFORMING AN INDEX SEARCH

1.

Select

the

Index Search button. The Index Search Option box will open.

2. Select a single camera or check the All Cameras option.

3. Select an event to search (sensor, motion, instant record) or select the All Event

option.

4.

Press

OK. There may be a delay while results are returned.

Results will be displayed in a column on the left side of the screen.
If no results are found, “NO IMAGE FOUND” will appear in the column.

5. Once the results are displayed, double-click on any one to search through them.

6. Once the desired image is found, apply it to the Main Search by selecting the

Close button at the bottom of the results column.

7

6

Advertising