Honeywell RCWL210A User Manual

Page 11

Advertising
background image

RCWL200A and RCWL210A

9

69-2112EFS—07

Troubleshooting

Two ‘beep’ sounds are heard and LED flashes twice after the normal chime sound…

This indicates a low battery in the chime. Install new batteries, type LR14 C size alkaline batteries.
Three ‘beep’ sounds are heard and LED flashes three times after the normal chime

sound…

This indicates a low battery in the bell push that activated the chime. Install a new battery, type

CR2032.
When the bell push is operated, the red confidence light does not turn on, or is only on

for a short time…

Low battery. Install a new battery, type CR2032.
The chime does not work…

• Check that the batteries are the correct type.

Only use alkaline batteries for chime.

• Check that the batteries are fitted correctly (no wrong polarity).

• Check that batteries are not loose.

• The chime could be out of range of the bell push. Try the chime in a different location.

• The chime might not have learned the identity of the bell push. Follow the programming

procedure in step 3.

Note: Do not press program button for more than 15 seconds, this will delete all the memory!

Repeat programming procedure in step 3 to restore operation.

69-2112EFS_D.indd 9

12/10/2009 12:05:45 PM

Advertising
This manual is related to the following products: