Harbor Freight Tools 47613 - Manual (Page 11)

Prepare Material Before Cutting
1. Support large panels to minimize risk of blade pinching and saw kickback.
2. Use the supplied Rip Guide (402) when ripping material by sliding it into the Base
Assy. and tightening Wing Bold (58). See Figures F and G below.
3. Securely clamp material to be cut to work bench.
4. Make sure saw does not cut into supports or workbench.
5. Use the appropriate type of blade for the material you are cutting.
Wing Nut (60)
Base Assy. (52)
Lock Handle (55)
Brush Cap (30)
Wing Bolt (58)
Side Handle (401)
Figure D Figure E
Figure F
Figure G
SKU 47613 Page 11