Harbor Freight Tools 47613 User Manual
Page 6
11.
Never touch moving parts. Never place your hands, fingers or other body parts
near the tool’s moving parts.
12.
Never operate without automatic guard return in place. Do not disable blade
guard when cutting.
13.
Guard against kickback. Kickback occurs when the saw stalls and is driven
backwards toward the operator. When this happens, release trigger switch
immediately.
14.
Unplug Circular Saw Line Cord before making adjustments.
15.
When operating, keep Line Cord away from the cutting area.
16.
Never operate the Circular Saw with its saw blade facing upward.
17.
After cutting, wait for the saw blade to stop turning before setting the unit
down.
18. Only use a 9” saw blade on this Circular Saw. The blade must have a speed rating
of 4,000 RPM or greater.
19.
WARNING! Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities, contain chemicals known (to the State
of California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
20.
WARNING! People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
SKU 47613
Page 6
REV 07l