HP 2500CMHP - Manual (Page 16)

8
12
7. Re-insert Tray 3 into the printer.
8. If Tray 3 is extended, place the Extended Tray Cover over the tray.
9. On the Control Panel, press [Menu] until PAPER HANDLING MENU
appears.
10. Press [Item] to select TRAY 3 TYPE=
11.
Press [Value] to select the media type you have loaded into the tray
and press [Select].
Click to see a video clip of the load Letter, A4 or Legal paper.
Click to see a video clip of the load B4, A3, 11” x 17”, 13” x 19”
1. Press [Menu] until DIAGNOSTICS MENU appears.
2. Press [Item] until ALIGN PRNT-HDS appears.
3. Press [Select]
4. The printer will print a page with 5 sets of alignment patterns.
5. In each set (A, B, C, D, or E) select the most aligned pair of lines (1, 2,
3, 4 or 5).
6. Enter the corresponding numbers in the Control Panel by pressing
[Value].
7. When you have entered a value for a set, press [Item] to move to the
next.
8. When you have finished entering the values, press [Select].
9. The printer will print a confirmation page consisting of 2 squares and
a cross.
10. Check the confirmation page to see if the lines on the squares and
the cross are aligned.
11. Re-align the printheads if the confirmation page is not satisfactory.
2500C/C+/CM HP Step 9 - Align Printheads
7