Humminbird GR16 - Manual (Page 16)

11
Save, Edit, or Delete a Waypoint
Save your current position as a waypoint: On any view, press the MENU key to display the
X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current position of the
boat as a waypoint.
Save the cursor position as a waypoint: On the Track or Combo view, use the Cursor key to
designate the position you want to save as a waypoint. Then press the MENU key to display the
X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current position of the
boat as a waypoint.
Save a position from the sonar history: On the Sonar view, use the Cursor key to point to a
feature in the sonar history (also called the Sonar Saver feature). Then press the MENU key to
display the X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current
position of the boat as a waypoint. The new waypoint will also record the depth at that location.
NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is
automatically assigned. You can edit the waypoint information later to give it a different name
and select an icon to represent it (see Waypoint submenu on the Navigation Main Menu Tab).
Display the Waypoints Submenu: From any view, press the MENU key twice to display the
Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select
Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.
Program a specific position as a waypoint: To create a waypoint that is NOT your current
position, from the Waypoints submenu, select the Create option and press the RIGHT Cursor
key. Use the Cursor keys to program a waypoint name, latitude, longitude, and icon before
selecting Save.
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key
to display a list of saved waypoints. Select the waypoint you want to edit and press the
RIGHT Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and the UP
and DOWN Cursor keys to changes values once you are in a field. In the Waypoint Name,
Latitude and Longitude fields, use the UP and DOWN Cursor keys to change the letter or
number. All upper and lower case letters are available, as well as digits 0-9 and some
punctuation characters. In the Waypoint Icon field, use the UP and DOWN Cursor keys to
change the icon used to represent the waypoint on the Combo and Track Views. You can
exit these fields with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select
Save and press the RIGHT Cursor key to save your changes.