HP N6350 - Manual (Page 36)

4. Open the ADF access door (1) and the roller cover (2) inside the ADF.
5. Wipe the ADF rollers with a clean, damp, lint-free cloth.
6. Wait several minutes for the rollers to dry, and then close the ADF roller cover and
access door.
7. Reconnect the USB or Ethernet cable and power cable to the scanner.
HP Scanner Tools Utility scanner maintenance information
The Maintenance tab of the HP Scanner Tools Utility displays the scanner usage and
maintenance history. You can use this tab to record ADF feed roller and separation pad
replacement. The utility tracks the number of pages fed through the ADF since the last
replacement and notifies you when you should replace the feed roller and separation pad.
To view the Maintenance tab, follow these steps:
1. On the Windows taskbar, click Start, point to Programs or All Programs, point to
HP, point to Scanjet, point to HP Scanjet N6350, and then click Scanner Tools
Utility.
2. Click the Maintenance tab on the HP Scanner Tools Utility dialog box.
TIP: You can also start the HP Scanner Tools Utility from the scanner control
panel. Press the Setup ( ) button, press
until Tools is highlighted, and then
press OK. If prompted, select your computer name and, if required, your PIN.
Chapter 4
34 Care and maintenance