Harbor Freight Tools 40315 User Manual
Page 5
SKU 40315
For technical questions, please call 1-800-444-3353.
Page 5
22.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.
23.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25.
When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.
Avoid serious eye injury. ALWAYS wear ANSI-approved safety impact eye
glasses underneath an ANSI-approved safety impact full face shield when as-
sembling and operating the Tile Saw.
2.
Dress safely. Do not wear loose clothing or jewelry as they can become caught
in moving parts. Wear a protective hair covering to prevent long hair from be
coming caught in moving parts. If wearing long-sleeve shirt, roll sleeves up
above the elbows.
3.
Make sure the Power Switch (21) is in its “OFF” position before plugging
the Power Cord/Plug (34) into an electrical outlet.
4.
Do not abuse the Power Cord/Plug (34). Do not pull the Power Cord to discon-
nect the Plug from an electrical outlet. Do not move the Tile Saw with the Power
Cord/Plug in the outlet. Keep the Power Cord/Plug away from heat, oil, sharp,
edges, and its own Cutting Wheel Blade (8).
5.
Never leave the Tile Saw unattended while it is running. Always turn off the
tool, unplug the tool from its electrical outlet, and wait until its Cutting Wheel
Blade (8) stops rotating before leaving the area.
6.
Do not handle the Power Switch (21) or Power Cord Plug (34) with wet
hands.
7.
Keep all Guards in place and in proper working order.