Harbor Freight Tools 40315 User Manual

Page 8

Advertising
background image

SKU 40315

For technical questions, please call 1-800-444-3353.

Page 8

33.

Turn off the Tile Saw, unplug its Power Cord/Plug (34) from its 120 volt,
grounded, electrical outlet, and allow the tool to completely stop prior
to performing any inspection, maintenance, or cleaning on the unit.

34.

Use the right tool or attachment for the job. Do not attempt to force a small
tool or attachment to do the work of a larger industrial tool. There are certain
applications for which this product was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this product,
and do not use this product for a purpose for which it was not intended.

36. WARNING! Some dust created by power sanding, sawing, grinding, drill

ing, and other construction activities, contain chemicals known (to the State of
California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, how often you
do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
(

California Health & Safety Code 25249.5, et seq.)

30.

Avoid splashing water on the Motor (42), Power Switch (21), Power Cord/
Plug (34), or any other electrical component.

31.

Make sure to stand on a dry, insulated surface such as a rubber mat while
using the Tile Saw.

32.

Never attempt to stand on the Tile Saw. Doing so may cause the Saw to tip,
causing personal injury and/or property damage.

35.

WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.

37.

WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Advertising