Honeywell EQUIP HD3MDIHX - Manual (Page 34)

34
Installing the Honeywell IP Utility and Web-Client Software
Figure 3-3 Honeywell IP Utility User Interface
The About menu displays the
software version installed.
The Status bar displays how many
devices are on the network, which
one you are connected to, and
which user is logged on.
The Discovery pane lists
the IP devices found on the
network and groups by
device type.
From the User tab, Administrators
can change the Web-Client user
passwords.
IP Network Setting assigns
network settings automatically
or manually.
Connect button
Disconnect button Limited/No connectivity
button
Refresh button
Upgrade Firmware
downloaded from the
Honeywell website.
Use the Product Filter drop-down
menu to select a specific device,
such as all HD3 series cameras.
Click Apply to save
manually configured
network settings.
Use Launch Browser
to open the HD3
series IP Web-Client
for each device. Use Batch Firmware Upgrade
to select a group of devices and
upgrade the firmware for all.
Enable or disable HTTP
Server.