Honeywell EQUIP HD3MDIHX - Manual (Page 49)

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361 Rev A 49
12/10
Taking a SnapShot
The SnapShot function allows you to save an image from Live View to a default folder on
your computer (C:\Program Files\Honeywell Video Systems\Support\Snapshots). Files are
saved as: DeviceName_Date_Time.bmp. You are not asked for confirmation.
SnapShot is available to Administrators and Users with administrator and guest privileges.
Device Settings
The Device Settings tab allows you to view the network settings and firmware details of the
camera. It also allows you to restore to basic or full Factory Defaults, and to reboot a
camera.
Configuring IP and Firmware Settings
Depending on the hardware installation, there is a tab called either Device Information or
Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information
available in the Honeywell IP Utility. It provides read-only network settings, firmware
settings, and video formats without having to access the IP Utility.
The Device Settings are the same for the Primary and Secondary streams.
Figure 4-5 Device Settings