Electronic clock & automatic oven timer operation – Hotpoint BD52 BD62 User Manual

Page 19

Advertising
background image

19

Step 4 Press & hold in the Cook Period button, the display will read 0.00 and the

‘cookpot’ symbol will light up.

With the Cook Period button still held in set the required Cook Period using the
“+” and “–” buttons. Example: 1hr 30 minutes (as shown).

Note: Cook Period is the length of time the food requires to cook.

Step 5 Release all buttons.

The timer display will revert to the time of day with the ‘Auto’ symbol lit &
‘cookpot‘ symbol remaining lit.

At the end of the Cook Period the ‘Auto’ symbol will flash and an intermittent
audible tone will be heard.
The audible tone will continue until cancelled. The ‘Auto’ symbol will continue to
flash until the timer is returned to Manual operation (see below).

Step 6 Press the Manual button. The audible tone will be cancelled and the

oven(s) will be returned to Manual.

Step 7 Turn the oven control(s) to the OFF position.

b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET COOK

PERIOD

Step 1

Check that the correct time of day is set, if not follow instructions for setting the time of day.

Step 2

Place food onto the correct shelf position in the oven and close the oven door(s).

Step 3

Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven
function.

Note 1

When cooking automatically the Cook Period can be checked at any time by simply
pressing the Cook Period button.

Note 2

When cooking automatically the End Time can be checked at any time by simply
pressing the End Time button.

NOTE: The Cookpot symbol disappears

Electronic Clock & Automatic Oven
Timer Operation

Advertising