Setting up the monitor, Installing the monitor on the stand, 3 setting up the monitor – HP LE1911I User Manual
Page 13: 3setting up the monitor
Advertising
3
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Installing the Monitor on the Stand
CAUTION:
Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
1.
Place the monitor panel face down on a dry, soft cloth and connect the VGA cable and power cable
to the monitor.
Figure 3-1
Connecting VGA and Power Cables to the Monitor
ENWW
Installing the Monitor on the Stand
5
Advertising
This manual is related to the following products: