HONDA HRS216SDA - Manual (Page 45)

Draining the Fuel Tank and Carburetor
1. Remove the carburetor drain bolt with a 10 mm wrench, and drain
the carburetor bowl fuel into an approved container.
2. Turn the fuel valve ON (see
page 9). This will allow fuel in
the fuel tank to drain through
the carburetor bowl. After the
fuel is completely drained,
reinstall the drain bolt.
Engine Oil
Change the engine oil (see page 33).
Engine Cylinder
Remove the spark plug (see page ). Pour a tablespoon (5 ~ 10 cc) of
clean engine oil into the cylinder. Pull the starter rope several times to
distribute the oil in the cylinder. Reinstall the spark plug. Pull the
starter rope slowly until resistance is felt then return the starter grip
gently. This closes the valves so moisture cannot enter.
Handlebar Folding
Remove the grass bag (if
installed). Loosen the handlebar
locking knobs. Press the
handlebar struts to release the
locating pins, then swing the
handlebar forward. Don’t allow the
cables to be bent or pinched.
STORAGE
43
DRAIN BOLT
LOCKING KNOB
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
•
Stop the engine and keep heat, sparks,
and flame away.
•
Handle fuel only outdoors.
WARNING