Assembly – HONDA HRS216SDA User Manual
Page 49
Unpacking
Remove all the protective cardboard from the mower, including the
piece around the handlebar.
Handlebar Setup
Loosen the two knobs on the
lower section of the handlebar
enough so you can raise the
handlebar into the mowing
position. Once the handlebar is in
place, tighten the knobs securely.
Install Starter Rope
Disconnect the spark plug cap.
Pull the flywheel brake lever back,
then pull the starter grip toward the
starter rope loop. Release the
lever, then press the rope into the
loop. Connect the spark plug cap.
Add Oil
The mower is shipped
WITHOUT OIL
in the engine. Refer to page 34
for what kind of oil to use, and how to correctly add oil to the engine.
Add Fuel
See page 14 for instructions on how to add fuel.
Before Use...
All operators of the mower must read the
MOWER SAFETY,
CONTROLS,
and
BEFORE OPERATION
chapters (starting on
page 4) before using the mower.
47
ASSEMBLY
LOCKING KNOB (2)
LOOP